Buffalo Tools IW12BX Instrukcje Operacyjne Strona 7

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 13
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 6
TWPUMP 2-Inch Semi Trash / Water Pump Assembly And Operating Instructions
7
PREPARING THE SEMI TRASH / WATER PUMP FOR USE
If this Gasoline Water Pump is being used for the first time, the following few steps are required to prepare it
for use.
STEP 1 ADD OIL
When new from the package, this Water Pump contains no oil in the engine crankcase. Add the
correct quantity of oil before operating this Water Pump for the first time. This Water Pump requires
engine oil to function. Engine oil is a major factor affecting engine performance and service life. The correct
quantity of oil is equal to the oil capacity of the engine crankcase and is listed below. Always determine that
this Water Pump has the correct quantity of oil before use.
Oil Capacity (fluid oz.)
18.5
Oil Type Recommended
SAE 5W-30
To add oil:
1. Confirm that this Water Pump is on a level surface.
2. Open the Oil Cap (A, Figure 2).
3. Using a funnel, add oil to fill the engine crankcase to the correct
quantity as stated above.
4. Replace Oil Cap.
STEP 2 ADD GASOLINE
Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious
injury or burns.
Do not fill the fuel tank near a heat, sparks or an open flame. Keep gasoline away from appliance pilot
lights, barbecues, electric appliances, power tools, etc.
Do not overfill the fuel tank. Always check for fuel spills and immediately wipe them up. Spilled fuel is a fire
hazard and causes environmental damage.
To ensure that this Water Pump runs smoothly, use only FRESH, UNLEADED GASOLINE WITH AN
OCTANE RATING OF 87 OR HIGHER. Unleaded gasoline produces fewer engine and spark plug deposits
and extends the life of the exhaust system.
1. Confirm that this Water Pump is on a level surface.
2. Unscrew fuel tank cap and set aside. (NOTE: The fuel tank cap may be tight and difficult to
unscrew.)
3. Slowly add fresh, unleaded gasoline to the fuel tank. Be careful not to fill the fuel tank above the
upper limit line. The fuel tank capacity for this Water Pump is listed below. NOTE: Because gasoline
can expand, do not fill the fuel tank to the very top.
4. Securely tighten the fuel tank cap and immediately wipe up any spilled gasoline with a dry cloth.
Fuel Tank Capacity (gals)
0.95
Fuel Type
Fresh, Unleaded Gasoline Octane Rating 87 or Higher
Figure 2
A
Przeglądanie stron 6
1 2 3 4 5 6 7 8 9 10 11 12 13

Komentarze do niniejszej Instrukcji

Brak uwag