Buffalo Tools IW12BX Instrukcje Operacyjne Pobierz pdf (Strona 10)

TWPUMP 2-Inch Semi Trash / Water Pump Assembly And Operating Instructions

CHANGING THE OIL

Oil is very hot immediately after use. Use extreme caution when working with a gasoline-powered

engine and its components such as engine oil. Serious burns can result if proper care is not taken.

The engine oil should be changed every fifty hours on this Water Pump.

To change the oil:

1. Place the Gasoline Water Pump on a solid, level surface.

2. Remove the oil drain plug. (A, Figure 4)

3. Place an oil pan beneath the oil drain.

4. Tilt the Water Pump to drain the engine oil into the oil pan.

5. Replace the oil drain plug.

6. Refill the engine with new oil.

7. Dispose of used oil properly.

AIR FILTER MAINTENANCE

Wear ANSI-approved safety gear, including safety goggles and heavy-duty work gloves when

servicing this Water Pump.

This Water Pump will work more efficiently with a clean air filter. The air filter should be checked every 25

hours of use, regardless of workload, and replaced every 100 hours regardless of workload.

To clean or replace the air filter:

1. Remove the air filter cover, which is held in place by a wing nut and is located

on top of the Water Pump. (A, Figure 5)

2. Remove the air filter.

3. If the air filter is paper, use a vacuum to remove any trapped dirt. If this

doesn’t work, replace with a new filter.

4. If the air filter is foam, wash the filter in warm water and a mild detergent

before rinsing thoroughly.

5. Squeeze out excess moisture and dry completely.

6. Briefly soak the filter in lightweight oil, squeezing out the excess, before

replacing it in the Water Pump.

Figure 4

Figure 5

1 2 ... 5 6 7 8 9 10 11 12 13

Brak uwag

Buffalo Tools IW12BX Instrukcje Operacyjne Strona 10